We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Berling Shield 5L
Protective Water Proofing Solution
How much paint do I need?
The volume of paint required for a job is a simple calculation. Just divide the square metre measurement (m2) of the area to be painted by the spread rate of the paint you’re applying (m2/l).
If you’re applying two coats, double the area. If you’re working out volumes for a primer, one coat is usually sufficient.
You can use this coverage calculator to work out your volumes.
Waterbased, protective, polysiloxane/silane, waterproofing solution, based on nanotechnology which penetrates deeply into the surface's smallest pores, protecting and fully waterproofing, any type of absorbent structural surface, such as cement, plaster, visible concretes, bricks, tiles, unpolished marbles (porous marbles) joints, alpha blocks, stones i.e. Karistos and Pilion stones etc.
It's nano molecular size gives it the ability to easily penetrate the surface's open pores, thus providing excellent waterproofing properties. The product allows high breathability to the surface, that prevents external moisture from entering the interior of the surface while at the same time allowing moisture in the interior to come out in the form of water vapor.
It does not affect the appearance of the surface and when dried the material is colorless and transparent. BerlingShiled, has great resistance to alkalis, while at the same time it prevents the appearance of salts (efflorescence).
Also, the product prevents the growth of mold and fungus and any other microorganisms that derive from moisture. It is very easily applied and can be used on both interior and exterior surfaces. After application the surface is very easily cleanable from various pollutants and from those that are transported through the rain.
Coverage per litre (m2/l) | 9 |
---|---|
Surface Type | Any Type of Absorbent Structural Surface |
Brands | Berling |
Interior/Exterior | Interior and Exterior |
Waterbased or Solventbased | Water Based |
Coverage | 7-10m²/l per coat |
Single/Two Pack | Single Pack |
Minimum Content | Minimum contents are the can size less 10% |
Recoat Time | After 10 minutes and while the surface is still damp from 1st coating |
Touch Dry | 30-60 mins |